Lumie Bodyclock Elite 300 Notice D'utilisation page 7

English
Display auto-dim
Controls the brightness of the display to minimise sleep
distractions. This feature is activated when you turn on the alarm
When you don't need an
before going sleep (see also
Program options:
– brightness drops to low level.
DISPLAY AUTO
– no auto-dim; display remains at usual brightness.
DISPLAY HIGH
– brightness drops to low level. Remains at
DISPLAY AUTO OFF
low level then goes completely dark when the light turns off (or
reaches nightlight level if you've selected a Nightlight option.)
Make sure A is down.
Press P to skip to the display auto-dim options e.g.
.
AUTO
Use Lamp –/+ to change setting.
Press P to skip to next program; otherwise the display will revert to
normal after 12 seconds.
Note: If you choose
DISPLAY AUTO OFF
time whilst the display is dark, one quick press on any button (except A,
or you will turn off the alarm!) will illuminate the display for 12 seconds
only.
Sunrise duration
Choose to wake with a short or long sunrise to suit you. Using
as an example, when the alarm time is set to 07:00,
SUNRISE 30
the light will gently come on at 06:30 and gradually increase to full
brightness over 30 minutes.
12 | www.lumie.com
alarm).
DISPLAY
and need to check the
English
Program options:
- the light takes 15 minutes to reach full brightness.
SUNRISE 15
- the light takes 30 minutes to reach full brightness.
SUNRISE 30
- the light takes 60 minutes to reach full brightness.
SUNRISE 60
- the light takes 90 minutes to reach full brightness.
SUNRISE 90
Make sure A is down.
Press P to skip to the sunrise duration options e.g.
Use Lamp –/+ to change setting.
Press P to skip to next program; otherwise the display will revert to
normal after 12 seconds.
Sunset duration
Choose to fall asleep with a short or long sunset to suit you. Using
as an example, starting from full brightness, the light
SUNSET 30
will take 30 minutes to gradually fade and turn off.
Program options:
- the light takes 15 minutes to fade and turn off.
SUNSET 15
- the light takes 30 minutes to fade and turn off.
SUNSET 30
- the light takes 60 minutes to fade and turn off.
SUNSET 60
- the light takes 90 minutes to fade and turn off.
SUNSET 90
Make sure A is down.
Press P to skip to the sunset duration options e.g.
Use Lamp –/+ to change setting.
Press P to skip to next program; otherwise the display will revert to
normal after 12 seconds.
.
SUNRISE 30
.
SUNSET 30
www.lumie.com | 13