Lumie Bodyclock Elite 300 Notice D'utilisation page 6

English
Note: You can only program Bodyclock Elite when the alarm is turned
off so make sure the A button is down (alarm time / A is not showing).
Then you can program these in much the same way as you set the
clock, alarm time etc. in Basic set-up.
Alarm options
Choose to wake with just a sunrise or add extra alarm features.
Program options:
- sunrise and alarm beep. Display shows B.
WAKE BEEP
- sunrise and audio, e.g. the radio or MP3 files.
WAKE AUDIO
Display shows R or M.
- sunrise then light flashes quickly on/off.
WAKE FLASH
- sunrise only.
WAKE LIGHT
Make sure A is down.
Press P to skip to the alarm options e.g.
Use Lamp –/+ to change setting.
Press P to skip to next program; otherwise the display will revert to
normal after 12 seconds.
Note: When you choose
WAKE AUDIO
Meditainment . To wake to a different Meditainment
DAWN CHORUS
sound (see Meditainment for more options), the radio (see
AM radio) or your own MP3 tracks (see
analogue source) you must save them to P1 (see
10 | www.lumie.com
.
WAKE BEEP
the default audio source is P1,
FM and
SD card and external
Audio features).
English
Sleep sound
If you enjoy listening to audio before sleep, you might like to set the
volume to fade down as you fall asleep. Or maybe have low level
background sound until you wake up – great if you work shifts and
need to block out other noise! This feature is activated when you
turn on the alarm (see also When you don't need an
Program options:
- no auto-fade, you control volume manually.
SLEEP SOUND OFF
– plays at your chosen volume for 22
SLEEP SOUND PERM
minutes then drops to permanent low volume. Display shows W.
– plays at your chosen volume for 22
SLEEP SOUND AUTO
minutes volume then drops to low volume (or goes off if the light is
off at this point). Remains at low volume then goes off when the
light turns off (or reaches nightlight level if you've selected a
Nightlight option.) Display shows W.
Make sure A is down.
Press P to skip to the volume auto-fade options e.g.
.
SOUND OFF
Use Lamp –/+ to change setting.
Press P to skip to next program; otherwise the display will revert to
normal after 12 seconds.
Note: When you choose
SLEEP SOUND PERM
the default audio source is P4, Meditainment
AUTO
To fall asleep to a different Meditainment sound (see
for more options), the radio (see FM and AM
SD card and external analogue
files (see
P4 (see Audio features).
alarm).
SLEEP
or
SLEEP SOUND
.
WHITE NOISE
Meditainment
radio) or your own MP3
source) you must save it to
www.lumie.com | 11