Problem Solving - Lumie Bodyclock Elite 300 Notice D'utilisation

English
Make sure A is down.
Press S to skip to Meditainment source or use a preset with
Meditainment option already saved e.g.
Use Tuning </> to change the track.
Press and hold a preset button if you would like to save (release
when sound is restored); otherwise the display will revert to normal
after 12 seconds.
Note: You can save Meditainment tracks to any preset. However, if you
want to fall asleep with fading volume you must save your chosen
sleep track to P4 (see also Sleep sound).
SD Card or external analogue source
Use Bodyclock Elite to listen to your favourite MP3 tracks.
Tips for using an SD card:
• Use a basic SD card (maximum 4GB).
• The SD card should contain ONLY MP3 audio files with .mp3
filename extensions saved – no folders or other file types.
• Tracks play one at a time rather than continuously;
use Tuning < / > to skip to another track.
• Do not remove the SD card from the slot while playing or when
you have saved a file to a preset.
Make sure A is down.
At the back of the unit, insert the SD card into the slot or plug the
mp3 player into the connector.
Press S to skip to
or
SD CARD EXTERNAL AUDIO
Display shows
READING...
Use Tuning </> to select a track.
20 | www.lumie.com
.
WHITE NOISE
source.
English
Press and hold a preset button if you would like to save (release
when sound is restored); otherwise the display will revert to normal
after 12 seconds.
Note: You can save an MP3 track to any preset. However, if you want to
wake up to a sunrise with your chosen track you must use P1 (see also
Alarm options). Use Volume +/– to set the wake-up volume then press
P1 to save. If you want to fall asleep with fading volume you must save
your chosen track to P4 (see also
8 Problem-solving
Replacement bulbs and glass lamp covers are available from Lumie.
I ran a test sunrise but the light came up really quickly.
When setting a test alarm make sure you allow enough time for a
full sunrise - the default sunrise takes 30 minutes. So if the time is
11:00 the earliest alarm time you can set is 11:30.
The display is too bright
See Display auto-dim for programming options that allow you to
set the brightness of the display.
The light will not come on but the clock still works.
Check to make sure the bulb is fully screwed into the socket. If this
doesn't work, try replacing the bulb.
Neither the clock nor the light works, or the clock is not doing
what I expect it to.
Turn off the power at the mains. Press and hold P as you turn the
power back on. This restores all the programs to the default state. If
this doesn't work, check the fuse in the plug.
Please contact your distributor if you have any other problems.
Sleep sound).
www.lumie.com | 21