Mettler Toledo IND780 Manuel D'installation page 69

RJ-45 for Diagnostics
and Configuration
Channel A
Channel B
Figure 2-69: ControlNet PLC Module Connections and Components
Do not plug an Ethernet cable into the RJ-45 connector shown at left in Figure
2-69. Damage to the IND780 may result.
Figure 2-70 shows the array of status indicator LEDs on the ControlNet card (see
also Figure 2-69).
Module Status
Figure 2-70: ControlNet Status Indicator LEDs
Figure 2-71 shows an example of a ControlNet cable, and a close-up view of the
connector. Note that the connector may be straight or right-angled, as seen here.
This cable is not supplied by Mettler Toledo.
Figure 2-71: ControlNet Cable and Connector
MAC ID Switches (not used)
1 2
Channel A
4 3
Module Channel B
IND780 Installation Manual
LED Array
ControlNet
Signal
Shield
2-41