Packing And Transport; Safety Rules - Solo 530 Instructions D'emploi

" WIDTH: 100 cm.
•
Remove the power mower from its packing.
•
Fix the handles to the handlebar support using the two screws and two
knobs pre-mounted on the handle. Make sure to position the control
cables correctly.
•
Fix the bar to the machine, removing the hooked spring (Fig.4 Ref.A)
located on the pin of the bar support (Ref.B). Insert the pin of the bar
support into the frame (Ref.C) and reinsert the spring (Ref.A) in the
direction of the hole. Take the plastic cylinder (Fig.4 ref.D), insert it into
the grass divider (Ref. E) and insert all into the pin of the bar (Ref.F)
correspondingly to the hole on the grass divider and on the cylinder. Fix
the grass divider (Ref. E) to the bar, inserting two screws (Ref.G) into the
threaded holes on the bar corresponding to the grass divider.
•
If the machine is to be transported, empty out the petrol tank and always
apply the plastic protective strip to the E.S.M. cutting bar blade. Read
the E.S.M. sheet attached.
IMPORTANT: THE PACKED MACHINE IS SUPPLIED WITH THE MOTOR WITHOUT OIL OR PETROL.
•
Read carefully the operation and maintenance manual enclosed with the machine.
•
The use of the machine is prohibited to persons under 16 years of age.
•
The operator is liable for damages since the machine is under his control.
•
Those unfamiliar with the machine or who have never used it are obliged to read the operation and maintenance
manual before operation.
•
In case of transport, disassemble the bar and empty the petrol out of the tank.
•
If the machine is left unattended, ensure that it cannot start up again.
•
Before running the machine, the operator must have a 5 meter radius of free space around him.
•
Dry any petrol leaks.
8
-Fig. n° 3-

PACKING AND TRANSPORT

" DEPTH: 47 cm.

SAFETY RULES

" HEIGHT: 63 cm.
-Fig.n.4-