Location Of The "S" And "+" Keys; Style 5S & Style 10S - Timer Mode - Bodet Style 5 Notice D'installation Et De Mise En Service

V

– Location of the "S" and "+" keys

1) These two keys are located on the back of the clock:
– Right side: when viewed from the back
– Left side: when viewed from the front (when being handled)
2) The "S" key is above the "+" key.
3) When pressed, an LED lights up to indicate the selected key.
Example showing the two keys pressed simultaneously:
VI – Style 5S and Style 10S – Timer mode
1) The timer keypad operates in count or countdown modes.
It has the following functions: start, stop, split time, closure of a dry contact when the count or
countdown ends (stops at a pre-programmed time).
The timer keypad can control up to ten Style 5S or Style 10S clocks.
The electronic board for Style 5S and Style 10S clocks is fitted with a connector strip (j).
2) Connect the timer keypad to the strip (j) using a 4-core cable (T-, T+, 0V and 15V) for the first
clock.
Wiring example using three Style 5S clocks (synchronisation via impulses):
Yellow 15V
Green 0V
White T+
Brown
T-
20 m
max.
T-
3) To link several Style 5S or Style 10S clocks to a single timer keypad, connect the T- and T+
terminals together using a 2-core cable (twin telephone cable). The first clock remains connected to
the timer keypad via a 4-core cable.
4) For more information, please refer to the timer keypad instructions.
10
All manuals and user guides at all-guides.com
8/10 cable, twin pairs (unshielded)

T+
0V 15V


EN

