Radio (ALS(FI)+DCF) synchronisation card
III
- Default configuration
To restore factory settings, press the red button on the electronic board until the clock turns black. Open the clock to
access this button (see Installation).
Open the clock by pulling the lower part of the clock towards you, then releasing it upwards, to access the push button.
Location of button on the electronic board.
IV
- Location of the «S» and «+» keys
1) These two keys are located on the back of the clock:
– Right side: when viewed from the back
– Left side: when viewed from the front (when being handled)
2) The "S" key is above the "+" key.
3) When pressed, an LED lights up to indicate the selected key.
Example of a 3-city Style Mondiale clock when both buttons are pressed simultaneously:
External synchronisation:
ALS (FI) or DCF
EN
9