Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
II - INTRODUCTION TO THE CRISTALYS AND OPALYS CLOCKS
The Cristalys or Opalys 14 clock are calendar clocks for indoor use.
They displays the hours (in 12 hr or 24 hr mode), minutes and date.
They automatically manages summer-winter time changeovers.
An ECO function enables the display to be switched off at night between 11pm and 6am.
They have three menus for making adjustments :
the time setting menu ;
the configuration menu ;
the technician menu, which is reserved for maintenance personnel.
Adjustments can be made using the two push buttons [SEL] and [+] located on the back of the
clock.
Fig. 1
III - SETTING IN OPERATION - INSTALLATION
3.1 Connection
a.
Turn the clock upside down on a table.
Unscrew the anti-theft locking screw.
Push the wall holder opposite the two
arrows to unclip it.
Remove the wall holder on the back
of the clock.
b.
Connect the Ethernet network on the
RJ45 connector.
Ethernet cable category: 4, 5 or 6 (buildings). In the latter case, use a female wall
connector with a small flexible male/male RJ45 cable.
The
type of synchronisation will have to be programmed in the Technician Menu (see
page 29), particularly the Multicast address which must be the same as that of the server
(by default 239.192.54.01).
20
Reset
°
C
"Select" button
SELECT
+
"
" button
Temperature probe
Publicité
Table des Matières
