Maintenance Menu; Maintenance Menu - All Models Except Style 7 Date And Style 7 Ellipse - Bodet Style 5 Notice D'installation Et De Mise En Service

XI

– Maintenance menu

To access the maintenance menu, open the configuration menu by pressing and holding "S",
then "+" for 3 seconds. Release both keys, then press and hold "S", then "+" again for 7 seconds.
11.1 Maintenance menu – all models except Style 7 Date and Style 7 Ellipse
Radio synchronisation (FI+DCF)
+
S
+ Hold down for 3 seconds
Open configuration menu
+
S
Hold down for 7 seconds
+
Software version
May differ from the version shown depending on the date of purchase.
S
+
S
S
+
S
+
S
+
S
Display test (tests for correct functioning of all LEDs)
S
End of menu
All manuals and user guides at all-guides.com
+
Select radio synchronisation
The double hyphen indicates good reception
+
+ +
...
Reset clock (enabled if "rstY" is selected)
Restore factory settings (enabled if "dF Y" is selected)
Search the information frame in accordance with
the selected synchronisation. (Default: Auto mode)
Wait for the FI signal for about 3 minutes before checking
DCF synchronisation.
Check reception from an antenna if one is connected.
Information display: time and date
+ +
...
EN
Set T° offset
(Style 10-10S)
21