Textron Jacobsen PGM Serie Manuel Technique page 14

6 OPERATION
6.4 STARTING/STOPPING ENGINE ______________________________________________
!
CAUTION
Always start and stop the engine when the mower is
on level ground. Keep feet away from blade when
starting engine.
Starting
1. Check oil level and fuel supply then open fuel valve
lever (G).
2. Move the choke lever (F) to the "CLOSED" position.
3. Set engine switch (D) to "ON".
4. Make certain the O.P.C. bail (C) is disengaged and
the parking brake (A) is engaged.
5. Select desired position for reel clutch lever (E).
To cut - engage reel clutch (E).
To transport - disengage reel clutch (E).
!
To prevent bodily injury or property damage,
never engage the reel clutch lever while the
engine is running or the O.P.C. bail is engaged.
6. Start the engine. Do not allow the cord to "snap"
back into the starter. Do not tilt the mower back
when starting.
7. When engine starts, move choke lever (F) to the
"OPEN" position. Intermittent choking may be
required while engine is cold.
8. Allow engine to warm up gradually.
Stopping
1. To stop the engine, release the O.P.C. bail (C), and
set engine switch (D) to "OFF" position. Close fuel
valve (G)
2. Engage parking brake (A).
14
All manuals and user guides at all-guides.com
WARNING
D
G
C
P
A
N
A
D
E
F
Figure 6A
B
B
C
Figure 6B
Figure 6C