Textron Jacobsen PGM Serie Manuel Technique page 6

2 SPECIFICATIONS
2 SPECIFICATIONS
2.1 PRODUCT IDENTIFICATION_________________________________________________
63280.........22 in., (559 mm) Professional Greens Mower
with InCommand™ control system,
gasoline engine (Honda), Operator Presence
Control, grass catcher, brakes and kickstand.
Serial Number ................ An identification plate, like the one
2.2 ENGINE__________________________________________________________________
Engine ....................... Honda GX-120 K1Q JG2 4-Cycle,
4 HP (2.98 kW) at 4000 RPM
Speed ........................ High Idle - 3300 + 100 RPM
Low Idle - 1700 + 100 RPM
Fuel............................ Regular Grade (Unleaded)
Fuel Tank ................... 0.66 Gallon (2.5 liter)
2.3 MOWER _________________________________________________________________
Height of cut ................. 5/64 to 7/16 in., (2 to 11 mm)
Bedknives ..................... Hardened carbon steel
High profile ................... yields 5/32 in., (4 mm) cut.
Low profile .................... yields 7/64 in., (2.8 mm) cut.
Tournament................... yields 5/64 in., (2 mm) cut.
Super Tounament ........... Yields 1/16 in. (1.6 mm) cut
2.4 TRACTION AND DIFFERENTIAL _____________________________________________
Drive Clutch .........................Centifugal, Engages at 2000
Traction Reduction Ratio .....24:1
Traction and Reel Drive .......Chain drive
Transport Wheels ................(2) bidirectional, pneumatic
Tire Pressure .......................6 to 8 psi (41 to 55 kPa)
Differential ...........................Full automotive type,
6
All manuals and user guides at all-guides.com
4.0 H.P.
shown, listing the serial number, is
attached to the right side frame.
RPM
11 x 4 Goodyear Softrac
Always provide the serial number of the unit when ordering
replacement parts or requesting service information.
CHARLOTTE, NC
YEAR OF
PRODUCTION:
63280
Product
63280
Use clean, fresh, regular unleaded gasoline, 86 octane
minimum.
Engine Oil . . . . . . . . . Capacity: 5/8 qt. (0.6 l)
Type: SAE 10W-30, API Classifi-
cation SF or SG
Cutting Frequency .........13/64 in., (5 mm)
Reel ...............................11 blades, 5 in., (127 mm)
Reel Clutch....................Separate Cog-type
Reel Reduction Ratio ....2.25:1
Width of cut ...................22 in., (559 mm)
Rear Drive Drum .................Machined aluminum alloy
Travel Speed .......................2.9 mph (4.7 km/h) @ 3000
®
A Textron Company
MADE IN U.S.A.
2005
1601
EEC Sound
Vibration m/s
Power
Arms
94 8.237
diameter hardened high
manganese, carbon steel
housed in traction drum
2 sections: 7-3/4 in., (O.D.) x
10.97 in., (197 x 278 mm)
rpm
2