Product Overview; Intended Use - Hilti DSH 600-X Mode D'emploi Original

3 Description
3.1

Product overview

3.1.1 Gasoline-powered cut-off saw
3.2

Intended use

The product described is a gasoline-powered cut-off saw for the wet or dry cutting of asphalt, mineral
construction materials or metals using diamond cut-off wheels or abrasive cut-off wheels.
The saw is not suitable for use in environments where there is risk of fire or explosion.
3.3 Possible misuse
▶ "Shoveling" with the gasoline-powered saw is not permissible.
3.4 Instructions for use
• Use of the wet cutting method is preferable in order to reduce the amount of dust produced when cutting.
By using the self-priming water pump (accessory) you can work without need for a water supply hose.
The water can be drawn, for example, directly from a container.
• Do not cut right through the workpiece in one pass. Move the saw back and forward several times until
it gradually reaches the desired cutting depth.
• To avoid damaging the diamond cut-off wheel when dry cutting, lift the wheel out of the cut for approx.
10 seconds every 30 to 60 seconds while the saw is still running.
• Resharpen a polished diamond wheel (i.e. when no diamonds project from the segment matrix) by cutting
with the wheel in a very abrasive material such as sandstone.
26 English
1
Guard
@
Water supply
;
Water connection
=
Front grip
%
Throttle trigger
&
Rear grip
(
Recoil starter pull handle
)
Fuel tank cap
+
Primer bulb
§
Fuel level indicator
/
Footplate
:
Exhaust wheelharge with spark filter
∙
cut-off wheel
$
Clamping screw
£
Clamping flange
|
Rating plate
¡
Safety grip with integrated brake actuation
Q
Start/stop switch with integrated half-throttle
W
lock
Water cock
E
Spark plug connector
R
Cleaning screw for water nozzle
T
Grip for guard adjustment
Z
Curved water distributor with integrated wa-
U
ter nozzles
Hole for locking pin for changing cut-off
I
wheels
Saw arm
O
Pump cover
P
Air filter cover
Ü
2316321
*2316321*