Setting Function "Nr; Setting Function "Camera Id; Setting Function "Language; Function "Camera Reset - Sygonix 680 TVL Mode D'emploi

l) Setting function "NR"
Here the noise reduction can be switched on/off or regulated separately for the brightness and
colour signal.
"NR MODE"
"Y LEVEL"
"C LEVEL"
m) Setting function "CAMERA ID"
If desired, the name of the the camera can be embedded in the image. Such an identifying as-
signment can be carried out especially with the use of numerous cameras, e.g. if you enter the
installation location. A simple identifi cation is also possible with the recording and later playback
of the camera image.
"OFF"
"ON"
n) Setting function "LANGUAGE"
The setup menu of the camera can be displayed in various languages. Choose among German,
English, Spanish, Portuguese, Russian, French and Chinese.
o) Function "CAMERA RESET"
To reset the camera to factory settings, select this menu point and briefl y press the button.
34
The home technology brand for the entire house. More information at www.sygonix.com
All manuals and user guides at all-guides.com
"Y/C": Noise reduction for brightness and colour signal
"Y": Noise reduction for the brightness signal
"C": Noise reduction for the colour signal
"OFF": Noise reduction switched off
Noise reduction level for brightness signal (0....15)
Noise reduction level for colour signal (0....15)
The display of the camera name is switched off.
The display of the camera name is switched on.
If you press the button, the name of the camera can be changed. You can
enter a total of two lines with 26 characters each.
Make sure that the typeset „CHR1" is always selected! With „CHR2", no char-
acters are stored and no letters appear for selection.
"CLR": The character just selected is deleted.
Arrow buttons: Use these to select the input point of the camera name that
you wish to change.
„POS": If you confi rm this function with the button, you can then freely select
the position of the camera name in the image (move the button up/down/
left/right). Confi rm the position by briefl y pressing the button.