Adjusting Zoom, Focusing The Image - Sygonix 680 TVL Mode D'emploi

All manuals and user guides at all-guides.com

8. Adjusting Zoom, Focusing the Image

The camera is equipped with a manually adjustable zoom lens; it is also possible to focus the
image.
To do this, remove the cover on the front of the camera by turning it counter-clockwise until it can
be taken off.
Behind the lens opening, you can see two small levers
with integrated fi xing screws.
1 Focusing
2 Setting of the zoom range
First, carefully loosen the fi xing screws with a small, fl at
screwdriver.
Then set the desired zoom range; then adjust the image
until it is sharp.
If the desired image section is displayed on the connected monitor, carefully tighten the fi xing
screws. Do not exert any force.
If necessary, correct the direction of the camera on the wall bracket.
Replace the cover and tighten the screws. Make sure that the rubber ring is seated correctly so
that no moisture can get into the camera.
26
The home technology brand for the entire house. More information at www.sygonix.com