Reset The Camera - Sygonix 2267527 Notice D'emploi

d) Reset the camera
Perform a reset if the camera is not functioning correctly or you
would like to put the camera into pairing mode.
Note
• Any previous connections will be lost after resetting.
• If previously paired with the app, you must also "Re-
move Device" via the app after the device has been
reset. Refer to the app operating instructions for infor-
mation about how to "Remove Device".
1. Open the compartment cover.
2. Press and hold the Reset button 4-5 seconds until you hear
a beep, then wait a few moments for the system to restart.
3. Repeat the pairing process after you hear the startup tone,
and the camera enters pairing mode. See section "14 "Smart
Life - Smart Living" App" on page 47 for information about
the pairing process.
4. Replace the compartment cover.
46