Attaching And Detaching Accessories; Nozzles And Suction Hose; Carrying Strap; Use As A Floor Vacuum Cleaner - Cleanmaxx VC-S1001 Mode D'emploi

Attaching and Detaching Accessories

CAuTIOn!
❐ Before you attach or detach any accessories, ensure that the device is not connected to the
mains power.

nozzles and Suction Hose

Carrying Strap

use as a Floor Vacuum Cleaner

01328_9_DE-GB-FR-NL_V0.indb 20
• The nozzles are inserted up to the limit stop into the suction
opening (6) on the dust container (8) .
Connecting the suction hose (17): Insert the matching end
piece of the suction hose into the suction opening. The noz-
zle you require is plugged into the other end piece.
CAuTIOn! The end pieces are not identical. Do not
attempt to forcibly push an end piece into the device. If
it cannot be attached easily, try the other end piece.
• To detach the nozzles or the suction hose, pull them out of
the suction opening.
• If you wish to use the carrying strap (16), attach its two
hooks to the eyelets on the motor housing.
You can adjust the length of the strap by sliding the buckle
on the strap.
• Detaching the carrying strap: Press the levers on the hooks
to open them and pull the hooks out of the eyelets.
• If you wish to use the device as a floor vacuum cleaner, place
the turbo nozzle (7) on and plug the telescoping rod (13)
into the connection opening in the motor housing.
• To detach the telescoping rod, press the release button (2)
and as you do so pull the rod out of the motor housing.
20
07.09.11 12:28