Dimension Drawings; Installation Preparation - Kübler Ants LEB02 Instructions D'utilisation

Kübler Group

4.1.2.1 Dimension Drawings

Sensor with fastening plate
Sensor without fastening plate

4.1.3 Installation Preparation

The following preparations can be made for the installation of the measuring system:
• Tools
– Drill with metal drill bits set - sensor car fastening
– Torx bit TX15
– Allen wrench/bit SW5
– Spanner SW16
– Flat-blade screwdriver
– Torque spanner 1...40 Nm [0.74...29.5 ft-lb]
– Stripping tool
– Tin snips and diamond file if necessary
– Installation lighting, e.g. headlamp
• Material
BA Ants LEB02 - R60074.0009 - 02
4 Installation
128234379
9007199382977291
EN - 33