Tipping; Installing Extraction Arm; Connecting Input Power - Miller FILTAIR MWX-D Manuel D'utilisation

Masquer les pouces Voir aussi pour FILTAIR MWX-D:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5-2.

Tipping

5-3. Tipping
5-3.

Installing Extraction Arm

5-4. Installing Extraction Arm

5-5. Connecting Input Power

5-4.
Connecting Input Power
18 in.
(460 mm)
18 in.
(460 mm)
805268-B
OM-239025 Page 18
!
!
!
!
Do not move or operate unit
where it could tip.
!
Do not move unit with extrac-
tion arm extended or unit
may tip.
!
!
Do not move unit by pulling
on extraction arm or equip-
ment may tip. Use handle on
fume extractor to move unit
!
Do not use this equipment to
support personnel, large
tools, or other material.
See extraction arm owner's
manual for installation and ser-
vice information.
1
115 Volt, 20 Amp AC
Grounded Receptacle
2
Plug From Unit
A 115 volt AC, 20 amp individual
branch circuit protected by time
delay (type D) fuses or circuit
breaker is required.
Select 12 AWG three-conductor
extension cord for distances up to
50 ft (15 m) or 10 AWG three-cond-
uctor extension cord for distances
1
up 100 ft (30 m).
2
1
2
Do not move or operate unit
where it could tip.
Do not move or operate unit where
Do not move unit with extrac-
it could tip.
tion arm extended or unit
may tip.
Do not move unit with extraction
arm extended or unit may tip.
Do not move unit by pulling
on extraction arm or equip-
Do not move unit by pulling on ex-
ment may tip. Use handle on
traction arm or equipment may tip.
fume extractor to move unit
Use handle on fume extractor to
move unit.
Do not use this equipment to
Do not use this equipment to sup-
support personnel, large
port personnel, large tools, or oth-
tools, or other material.
er material.
See extraction arm owner's
manual for installation and ser-
vice information.
See extraction arm owner's manual for
installation and service information.
805268
1 115
Volt,
20
Receptacle
2 Plug From Unit
A 115 volt AC, 20 amp individual branch cir-
cuit protected by time delay (type D) fuses or
circuit breaker is required.
Select 12 AWG three-conductor extension
cord for distances up to 50 ft (15 m) or 10
AWG three-conductor extension cord for dis-
tances up 100 ft (30 m).
805268-B
OM-239025 Page 15
OM-239025 Page 15
Amp
AC
Grounded

Publicité

Table des Matières
loading

Table des Matières