Miller FILTAIR Low Profile Extraction Hoods Manuel Du Propriétaire
  1. Manuels
  2. Marques
  3. Miller Manuels
  4. Accessoires de soudage
  5. FILTAIR Low Profile Extraction Hoods
  6. Manuel du propriétaire
Miller FILTAIR Low Profile Extraction Hoods Manuel Du Propriétaire

Miller FILTAIR Low Profile Extraction Hoods Manuel Du Propriétaire

8 x 15 ft, 10 x 16 ft et 12 x 14 ft
Masquer les pouces
Table des Matières

Publicité

Liens rapides

Télécharger ce manuel
OM-261 093C
2013−07
Description
Weld Fume Hood
)
FILTAIR
Low Profile
Extraction Hoods
8 x 15 Ft, 10 x 16 Ft And 12 x 14 Ft
Read And Save These Instructions
File: Accessory
Visit our website at
www.MillerWelds.com

Publicité

Table des Matières
loading

Manuels Connexes pour Miller FILTAIR Low Profile Extraction Hoods

Sommaire des Matières pour Miller FILTAIR Low Profile Extraction Hoods

  • Page 1 OM-261 093C 2013−07 Description Weld Fume Hood FILTAIR Low Profile Extraction Hoods 8 x 15 Ft, 10 x 16 Ft And 12 x 14 Ft Read And Save These Instructions File: Accessory Visit our website at www.MillerWelds.com...
  • Page 2 We know you don’t have time to do it any other way. That’s why when Niels Miller first started building arc welders in 1929, he made sure his products offered long-lasting value and superior quality.

  • Page 3: Table Des Matières

    TABLE OF CONTENTS SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING ....... . . 1-1.

  • Page 5: Section 1 − Safety Precautions - Read Before Using

    SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING fume 2011−10 Protect yourself and others from injury — read, follow, and save these important safety precautions and operating instructions. 1-1. Symbol Usage DANGER! − Indicates a hazardous situation which, if Indicates special instructions.

  • Page 6: Arc Welding And Plasma Cutting Hazards

    FALLING EQUIPMENT can injure. FIRE OR EXPLOSION hazard. D Use equipment of adequate capacity to lift and D Do not install or place unit on, over, or near support unit. combustible surfaces. D If using lift forks to move unit, be sure forks are D Do not install unit near flammables.
  • Page 7 D Do not use welder to thaw frozen pipes. FUMES AND GASES can be hazardous. D Remove stick electrode from holder or cut off welding wire at contact tip when not in use. Welding and cutting produces fumes and gases. D Wear oil-free protective garments such as leather gloves, heavy Breathing these fumes and gases can be hazardous shirt, cuffless trousers, high shoes, and a cap.

  • Page 8: Additional Symbols For Installation, Operation, And Maintenance

    1-4. Additional Symbols For Installation, Operation, And Maintenance FIRE OR EXPLOSION hazard. BATTERY EXPLOSION can injure. D Do not install or place unit on, over, or near D Do not use welder to charge batteries or jump combustible surfaces. start vehicles unless the unit has a battery D Do not install unit near flammables.

  • Page 9: California Proposition 65 Warnings

    1-5. California Proposition 65 Warnings Welding or cutting equipment produces fumes or gases This product contains chemicals, including lead, known to which contain chemicals known to the State of California to the state of California to cause cancer, birth defects, or other cause birth defects and, in some cases, cancer.

  • Page 10: Section 2 − Mesures De Sécurité

    SECTION 2 − MESURES DE SÉCURITÉ − EXTRACTION DES FUMÉES − À LIRE AVANT UTILISATION fume_2011−10_fre Se protéger et protéger les autres contre le risque de blessure — lisez, appliquez et rangez en lieu sûr ces consignes importantes de sécurité et d’utilisation. 2-1.

  • Page 11: Dangers Du Soudage À L'arc Et Du Coupage Au Plasma

    D Lire et comprendre les instructions des fiches signalétiques et du Les PIÈCES MOBILES peuvent fabricant concernant les métaux, les consommables, les causer des blessures. revêtements, les nettoyants et les dégraisseurs. D L’extracteur de fumées doit être utilisé avec le bras d’extraction, D S’abstenir de toucher des organes mobiles tels les tuyaux, le filtre et les autres composants recommandés par le que des ventilateurs.
  • Page 12 D Ne pas enrouler les câbles autour du corps. D Portez un casque de soudage approuvé muni de verres filtrants D Si la pièce soudée doit être mise à la terre, le faire directement appropriés pour protéger visage et yeux contre les rayons et les avec un câble distinct.

  • Page 13: Dangers Supplémentaires En Relation Avec L'installation, Le Fonctionnement Et La Maintenance

    D Ne jamais placer une torche de soudage sur une bouteille à gaz. DES PIECES DE METAL ou DES D Une électrode de soudage ne doit jamais entrer en contact avec SALETES peuvent provoquer des une bouteille. blessures dans les yeux. D Ne jamais souder une bouteille pressurisée −...
  • Page 14 D Tenir l’équipement (câbles et cordons) à distance des véhicules Les PIÈCES MOBILES peuvent mobiles lors de toute opération en hauteur. causer des blessures. D Suivre les consignes du Manuel des applications pour l’équation D S’abstenir de toucher des organes mobiles tels de levage NIOSH révisée (Publication Nº94–110) lors du levage que des ventilateurs.

  • Page 15: Proposition Californienne 65 Avertissements

    2-5. Proposition californienne 65 Avertissements Les équipements de soudage et de coupage produisent des Ce produit contient des produits chimiques, notamment du fumées et des gaz qui contiennent des produits chimiques plomb, dont l’État de Californie reconnaît qu’ils provoquent dont l’État de Californie reconnaît qu’ils provoquent des mal- des cancers, des malformations congénitales ou d’autres formations congénitales et, dans certains cas, des cancers.

  • Page 16: Section 3 − Specifications

    591 lb (268 kg) 675 lb (306 kg) 780 lb (354 kg) The 8 x 15 Ft model is shown. Height Front View Perimeter Bracket With Miller Label Perimeter Bracket Perimeter Bracket With Miller Label Length With Miller Label Width...
  • Page 17 B. Identifying Panel Length Hood Size 8Ft x 15 Ft 10Ft x 16 Ft 12Ft x 14 Ft Stock No. 301048007 301050006 301052002 Length A 4 Ft (48 in.) 5 Ft (60 in.) 6 Ft (72 in.) Length B 4 Ft (48 in.) 5 Ft (60 in.) 6 Ft (72 in.) Length C...

  • Page 18: Section 4 − Assembly

    SECTION 4 − ASSEMBLY 4-1. Selecting A Location The 8 x 15 Ft model is shown. 301 048007-1 Only qualified persons should in- Do not use equipment to support Moving The Equipment stall, operate, maintain, and repair site-installed ducts, interconnecting Lifting Eye this unit.

  • Page 19: Tools Needed

    4-3. Extraction Hood Assembly See Section 6 for an exploded parts view. A. Tools Needed 3/8, 7/16, 1/2, 9/16 in. 3/8, 7/16, 1/2, 9/16 in. 5/32 in. Allen Head B. Torque Values Torque assembly hardware as follows: Hardware Torque Value 1/4 in.
  • Page 20 Lifting Bracket Perimeter Bracket Mounting Plate side perimeter brackets. Corner End Perimeter Bracket A (With Miller Left Post Support Bracket Assemble left side perimeter brackets but Label) do not attach them to right side and end Right Post Support Bracket perimeter brackets.
  • Page 21 D. Assembling Extractor Housing The 8 x 15 Ft model is shown. See Section4-3B for installation hardware torque values. Extractor Side Bracket Extractor Tray Coupling Bracket Left Extractor Housing Mounting Bracket Right Extractor Housing Mounting Bracket Angle Flange Adapter Duct Extractor Top Cover Use 1/4 x 3/4 in.
  • Page 22 E. Attaching Extractor Housing And Left Side Perimeter Bracket See Section 4-3B for installation The 8 x 15 Ft model is shown. hardware torque values. Extractor Housing Install squaring Right Side Perimeter Brackets bracket beneath top of perimeter bracket. Use 5/16 x 3/4 in. screws and nuts to at- tach extractor housing to right side peri- meter brackets.
  • Page 23 F. Attaching Top Cover Support Brackets, Top Cover Mounting Brackets, And Top Covers The 8 x 15 Ft model is shown. Install long and side support mounting brackets beneath perimeter bracket, and also beneath extractor. 301048007-5 / Ref. 300 963-2A side support brackets and center support long and side support brackets to extractor See Section 4-3B for installation hard-...
  • Page 24 G. Attaching Top Cover Mounting Brackets And Top Covers The 8 x 15 Ft model is shown. See Section 4-3B for installa- tion hardware torque values. Perimeter Mounting Bracket Extractor Mounting Bracket Top Cover Install top covers in appropriate loc- ations on perimeter assembly as shown.
  • Page 25 Lifting Extraction Hood Assembly Lift only from the lifting eyes located at the top of the unit. Be sure location is clear of all obstructions, including util- ity lines and roof overhangs. See Section 4-3B for installa- tion hardware torque values. Lifting Eyes Spreader Bar Fixed Length Lifting Straps...

  • Page 26: Section 5 − Maintenance

    SECTION 5 − MAINTENANCE 5-1. Maintenance Schedule Maintain more often during severe conditions. n = Check Z = Change ~ = Clean l = Replace Reference * To be done by Factory Authorized Service Agent Each n Extraction System Every See Section Months n l Damaged Or...
  • Page 27 Notes Work like a Pro! Pros weld and cut safely. Read the safety rules at the beginning of this manual. OM-261 093 Page 23...

  • Page 28: Section 6 − Parts List

    SECTION 6 − PARTS LIST Hardware is common and not available unless listed. 301 04-8007-7 Figure 6-1. 8 x 15 Ft Extraction Hood Assembly OM-261 093 Page 24...
  • Page 29 ....258298001 Bracket Assy, Perimeter Modular Hood 5 ft (Includes Miller Label) ....
  • Page 30 Hardware is common and not available unless listed. Ref. 301 04-8007-7 Figure 6-2. 10 x 16 Ft Extraction Hood Assembly OM-261 093 Page 26...
  • Page 31 ....257822001 Bracket Assy, Perimeter Modular Hood 4 Ft (Includes Miller Label) ....
  • Page 32 Hardware is common and not available unless listed. 301052002-7 Figure 6-3. 12 x 14 Ft Extraction Hood Assembly OM-261 093 Page 28...
  • Page 33 ....258969001 Assy, Perimeter Bracket Modular Hood 6ft (Includes Miller Label) ..... .
  • Page 34 Notes Work like a Pro! Pros weld and cut safely. Read the safety rules at the beginning of this manual.
  • Page 35 Effective January 1, 2013 (Equipment with a serial number preface of MD or newer) This limited warranty supersedes all previous Miller warranties and is exclusive with no other guarantees or warranties expressed or implied. Warranty Questions? LIMITED WARRANTY − Subject to the terms and conditions below, 6 Months —...

  • Page 36: For Service

    Contact the Delivering Carrier to: File a claim for loss or damage during shipment. For assistance in filing or settling claims, contact your distributor and/or equipment manufacturer’s Transportation Department. © ORIGINAL INSTRUCTIONS − PRINTED IN USA 2013 Miller Electric Mfg. Co. 2013−01...

Ce manuel est également adapté pour:

Filtair 400 fume

Table des Matières