Videotec MAXIMUS MHX Manuel D'instructions page 13

4.5 Characteristics of installable
devices
Cameras and lenses
• Maximum power: 13W
• Dimensions (WxHxL): 80x82x245mm
(3.1x3.2x9.6in)
The camera/optics must be of a basic geometric
form, and installed at least 10mm from the inner
surface of the enclosure window.
The camera/optics to be installed shall not be
electromagnetic or contain lasers, continuous wave
sources or ultrasonic energy radiating equipment.
The camera/optics to be installed shall not contain
cells or batteries.
MNVCMHX_2222_EN
4.6 Cable entry
The product is supplied with plastic caps for
cable entry protection. They cannot be used for
installation.
Unused cable entries must be closed using
appropriate Ex certified locking devices with "db"
and "tb" explosion protection, suitable for the use
conditions and installed correctly.
All cable glands shall be Ex certified, as appropriate,
with protection type "db" and "tb", suitable for the
conditions of use and installed correctly.
When conduit is used, a suitable Ex certified
stopping box shall be used, as appropriate, with
protection type "db" and "tb", suitable for the
conditions of use and installed correctly.
The stopping box must be fitted within 50mm
(1.97in) from the enclosure entry.
The cable entry temperatures are specified in the
marking.
To maintain the IP level of product use cable glands
with appropriate IP level and apply to threads a
sealant compliant with standard IEC/EN60079-14.
CAUTION! Connectors/cable glads and
cables must be suitable for an operating
temperature of at least +30°C above the
ambient termperature.
11