The Following Instructions Are To Be Observed Prior To Installation Of The Wall Entry - Hauff-Technik MIS 60-ND Instructions D'installation

MIS 60-ND
A cartridge gun is required for the correct processing
of the expansion resin (Art. no.: 1920002002). This
can be ordered directly through Hauff-Technik (see
fi g.: 1).
The Hauff MIS 60-SVS quick tensioning device is a
reusable assembly tool. It is included in the
packing unit and can also be ordered separately, if
required:
Art. no.: 2900100850 (see Fig.: 2).
10 The following instructions are to be observed prior to installation of the
wall entry:
WARNING!
Risk of injury in the event of improper installation!
Improper installation can result in signifi cant bodily harm and property damage.
• MIS 60-ND installation must comply with the relevant professional association
• The nationally applicable laying and fi lling regulations for pipes and cables are
NOTE!
Failure to seal due to incorrect installation!
Improper installation can result in damage.
• All surfaces must be clean, fi rm and free of dust and grease.
• No cleaning agents containing solvent may be used to clean the MIS 60-ND. We
• For details of other accessories and further information, see www.hauff-technik.
26
regulations, VDE provisions, national safety and accident prevention regulations
as well as company regulations (work and procedural instructions).
to be observed at all times.
recommend using cable cleaner KR M.T.X..
de and the technical specifi cation sheets.
Art. Nr.: 5090032017 Rev.: 00/2018-07-31
EN
Fig.: 1
Fig.: 2