Explanation Of Symbols; Warnings; Tips And Recommendations - Hauff-Technik MIS 60-ND Instructions D'installation

MIS 60-ND

4.1 Explanation of symbols

1
Work stages
►
Effect/result of a work step
1
Reference numerals in drawings

4.2 Warnings

Warnings are indicated in these assembly instruction by means of symbols. The warnings are preceded
by signal words which show the extent of the hazard. It is imperative to observe the warnings and
act with care so as to avoid accidents, bodily harm and damage.
DANGER!
... indicates a direct hazard which can result in death or severe injury if not avoided.
WARNING!
... indicates a potential hazard which can result in death or severe injury if not avoided.
CAUTION!
... indicates a potential hazard which can result in negligent or slight injury if not
avoided.
NOTE!
... indicates a potential hazard which can result in damage to property or the
environment if not avoided.

4.3 Tips and recommendations

... emphasises tips and recommendations as well as information for successful
installation.
22
Art. Nr.: 5090032017 Rev.: 00/2018-07-31
EN