Hauff-Technik MIS 60-ND Instructions D'installation page 32

MIS 60-ND
Cut the resin filler hose to 150 mm (measured from the
11
inside wall of the building) with the side cutter (a shor-
ter hose makes filling easier) (see fig.: 15).
Legend for fig.: 15
1 150 mm
(inside wall of the building to end of the resin filler
hose)
Firmly connect the mixing nozzle to the resin filler hose
12
up to the stop (see fig.:16).
Unscrew the cap of the resin cartridge (Tangit iM 3000,
13
150 ml) (see fig.: 17).
Screw the cartridge into the mixing nozzle (see fig.: 18).
Remove the bottom cover of the resin cartridge (see fig.:
14
19).
32
Art. Nr.: 5090032017 Rev.: 00/2018-07-31
EN
1
Fig.: 15
Fig.: 16
Fig.: 17
Fig.: 18
Fig.: 19