Required Tool And Auxiliaries; The Following Instructions Are To Be Observed Prior To Installation - Hauff-Technik ESH Basic-FUBO-GK/MBK Instructions D'installation

ESH Basic-FUBO-GK/MBK - Single-line building package
for buildings without a basement
9

Required tool and auxiliaries

For the proper installation of the ESH Basic-FUBO-GK/MBK as well as the ESH Basic-MBK seal
insert, alongside the standard tool, the following tools and implements are required:
1 MSH/ESH tool set (art. no.: 1559001000)
1 GML lubricant (art. no.: 1591000754)
Spirit level, pliers, binding wire, hammer, pocket rule
10 The following instructions are to be observed prior to installation of the
ESH Basic-FUBO-GK/MBK:
WARNING!
Risk of injury in the event of improper installation!
Improper installation can result in significant bodily harm and property damage.
• ESH Basic-FUBO-GK/MBK Installation must comply with the relevant professional
• The nationally applicable laying and filling regulations for pipes and cables are
NOTE!
No sealing due to incorrect assembly!
Improper installation can result in damage.
• Seal the underground and pipe substructure well prior to laying pipes/cables
• The norms and directives referred to here are valid in Germany only. In all other
• No cleaning agents containing solvent may be used to clean the ESH Basic-FUBO-
• The current building waterproofing standard DIN 18533 for underground structural
• For details of other accessories and further information, see www.hauff-technik.de
association regulations, VDE provisions, national safety and accident prevention
regulations as well as company regulations (work and procedural instructions).
to be observed at all times.
so that the latter cannot subside.
countries, the national norms and directives are to be observed as amended.
GK/MBK We recommend using cable cleaner KR M.T.X.
components is to be observed.
and the technical specification sheets.
Art. Nr.: 5090033074 Rev.: 01/2018-09-05
EN
27