ESH Basic-FUBO-GK/MBK - Single-line building package
for buildings without a basement
3
General information and intended use
According to their intended use, our products have been designed exclusively for installation in buildings
made from state-of-the-art construction materials. We do not accept liability for use deviating from or
beyond this unless our express written confirmation has been obtained in advance.
For warranty conditions, please see our current General Terms and Delivery Conditions.
ESH Basic-FUBO-GK/MBK meet the requirements of Annex B1 of Test Specification VP 601 dated
January 2008 and are compatible with gas building entries which likewise comply with Supplement
B1 in terms of design and construction.
Gas and watertight ESH Basic-FUBO-GK/MBK for the gas, water and electricity areas, to be fitted for
buildings without a basement and for absorption of ESH Basic-MBK seal insert.
In order to maintain the wall clearance, depending on the foundation design and upon discussion with
the architect or builder, a recess in the strip foundation can be planned!
ESH Basic-FUBO-E/ESH Basic-MBK is suitable for application areas such as standing seepage water,
pressurised water, Class 1 waterproof concrete, DIN 18533 W1-E.
4
Safety
This section provides an overview of all the main safety aspects for optimum protection of personnel
and a safe installation process.
If there is a failure to observe the instructions and safety information set out here, this may result in
significant hazards.
ESH Basic-FUBO-GK/MBK installation must comply with the relevant professional association regulations,
VDE provisions, national safety and accident prevention regulations as well as company regulations
(work and procedural instructions).
The fitter must wear the relevant protective clothing.
Only intact components may be installed.
4�1 Explanation of symbols
1
Work stages
►
Effect/result of a work step
1
Reference numerals in drawings
22
Art. Nr.: 5090033074
Rev.: 01/2018-09-05
EN