SilverCrest SEF3 2000 C4 Mode D'emploi page 9

WARNING! RISK OF FIRE!
Do not use an external timing switch or a separate remote
►
control system to operate the appliance.
Never melt solid fat (fat in blocks) in the deep fat fryer. Due
►
to the high temperatures that are generated before the fat
covers the heating element, the heating element can be
damaged or there could be a fire! Melt the fat beforehand
in a saucepan or similar.
Do not use the appliance near hot surfaces.
►
Never leave the appliance unattended while it is being used.
►
Caution! Hot surface!
Never use water to extinguish a fire in the deep fat
fryer!
Old or dirty fats and oils can spontaneously ignite if over-
►
heated. Change the oils or fats regularly. In the case of
a fire, remove the plug from the mains power socket and
smother the burning fat or oil with a blanket.
CAUTION – APPLIANCE DAMAGE!
When filling the frying container with fat, never fill it to
►
above the MAX marking or to below the MIN marking.
Whenever you intend to switch the appliance on, first ensure
that there is sufficient oil or fat in the deep fat fryer.
Never switch the appliance on if there is no oil or liquid fat
►
in it. Otherwise the appliance may overheat.
This deep fat fryer is suitable only for frying foodstuffs. It is
►
not designed for cooking liquids.
Before initial use
■ Before you use the deep fat fryer for the first time, please clean all individual
components thoroughly and carefully dry them (see chapter "Cleaning and
care").
■ 6 │ GB │ IE
SEF3 2000 C4