Publicité
Les langues disponibles
Les langues disponibles
Installing the electronic knob cylinder C100 V3
A
Attention!
The electronic knob cylinder C100 V3 must be installed in the appropriate
size: The electronic knob cylinder C100 V3 is manufactured in several cylinder
lengths. Before installation, make sure that the electronic knob cylinder C100 V3 is
in the size matching the door leaf thickness. The cylinder may not protrude more
than 3 mm on other side.
Installation and adjustments according to EN 15684: All components must be
installed and adjusted in a manner which ensures conformity with EN 15684.
Do not touch any of the internal components: There are components and elec-
tronics around the battery compartment which can be damaged when improper-
ly handled. The electronics can be destroyed due to electrostatic discharge. These
internal components may not be touched.
The connecting cable (flexible connector) must not be kinked: With installa-
tion of the half-cylinder with removable knob, it must be ensured that the con-
necting cable (flexible connector) is not pinched or kinked during installation.
Installation
57
EN
Publicité
