Publicité
Les langues disponibles
Les langues disponibles
Term
I
Knob
(electronic side,
outside)
Knob
II
(mechanical side,
inside)
1
Knob cover
2
Special tool (optional) The knobs can be removed using special tool.
CR2 battery
3
Bolt washer
4
Guide
5
6
Rectangular nut
Knob holder
7
Knob mount
8
Grub screw
9
Cylinder fixing screw The knob cylinder is fixed in the mortise lock by the cylinder fixing screw.
10
Cylinder housing
11
12
Battery
compartment
EN
50
Explanation of terminology for the double cylinder
Description
Knob on the electronic side consisting of:
· cylinder knob cover (
· battery compartment (
· knob mount (
Knob on the mechanical side consisting of:
· cylinder knob cover (
· knob holder (
· knob mount (
The cylinder knob cover is a cover for the knob cylinder C100 V3.
The CR2 battery supplies power to the electronic knob cylinder C100 V3.
The bolt washer is screwed into the respective side with the knob holder.
It has a flat area and a point-shaped marking that must point in the
direction of the cylinder housing on both sides.
The guide on the locking disc guarantees that the knob is mounted
correctly.
The knob mount (
rectangular nut and grub screw (
The knob holder supports the cylinder knob cover of the mechanical side
and is screwed into the knob mount.
The knob on each side is inserted in the knob mount and screwed
together with the bolt washer (
to fit the parts together, which is determined by the position of the bolt
washer.
The knob mount (
with the grub screw and rectangular nut (
The cylinder housing is installed in the door with the cylinder fixing screw (
The battery compartment is screwed into the knob spindle with the knob
8
mount (
). A CR2 3 V battery (
Notes in accordance with VdS directives2156-2, 2386, 3169-1 and 3169-2
1
),
12
) for CR2 battery (
8
).
1
),
7
) and
8
).
8
) is screwed into the knob holder (
9
).
4
). In the process, there is only one way
8
) and the knob holder (
3
) must be inserted .
3
) and
7
) with the
7
) are screwed together
6
).
10
).
Publicité
