Intended use
The electronic knob cylinder C100 V3 is suitable for all commercially-available doors
with DN mortise locks and European profile cylinders, as well as for locks on glass
leaf doors. It has been developed, designed and manufactured for rough use in
doors installed indoors and outdoors.
The electronic knob cylinder C100 V3 can be used on fire barriers up to fire
resistance class T90. Observe the applicable regulations for use in fire doors.
The electronic knob cylinder C100 V3 double cylinder is suitable for escape doors
Double cylinder
because the interior door knob is continuously activated and the door can always
suitable for
be unlocked from the inside.
escape doors
The electronic knob cylinder C100 V3 half-cylinder is not suitable for escape doors,
because the knob does not operate when there is a loss of battery power or the
connection to an online control system is interrupted and the door cannot be
opened.
The electronic knob cylinder C100 V3 is suitable for installation according to the
installation instructions and use according to the functional description.
It is not intended for any other type of use.
EN
40
Notices