Bowa ErgoLAP MONOPOLAR Mode D'emploi page 34

3.5.2. Assembly
3.5.3. Disassembly
 Carry out in reverse sequence
14
A Jaw
B Shaft tube
Step 1:
 Introduce A into B.
Step 2:
 Push A up to stop, if
necessary while turning A.
Step 3:
 Turn A by 90°.
Engagement noticeable.
Step 4:
 Visually check:
surface to surface?.
 Check firmly seated, for
this, pull A.
 Introduce A/B into C.
During this, simultaneously
press C1 and C3 and hold
A1 closed.
C  Open and close A1.
C2  Try stopping A1, for this
operate C2.
D HF cable
 Check firmly seated.
MN030-616-S1 EN