Table des Matières
Publicité
4. TABLE MOVEMENTS (NORMAL AND REVERSE ORIENTATIONS)
4.1 Seat, Back and Leg Sections
4.2 Lateral Tilt
4.3 Height and Sliding
4.4 Head Section
5. TABLE RIGIDITY
5.1 Check both ends of tabletop for any horizontal or vertical play.
5.2 Check side tilt mechanism for any play.
5.3 Check central column for any play.
5.4 Check for wobbling of table base due to uneven floor locks.
Note:
Before the base cover is closed, please make sure tools are left outside of the table
base.
Remarque: Avant de refermer le couvercle de la base, assurez-vous de n'oublier aucun outil
dans la base de la table.
6.7
Battery Charging Procedures
Batteries will be charged automatically as long as the AC power is plugged in (#4, Figure 5-4-1 or
5-4-2). Battery Level Indicator indicates low or discharged battery conditions on the Hand
Pendant (#16, Figure5-2) as well as on the Base Panel (#8, Figure5-4-1 or 5-4-2). We
recommend that AC power be plugged in whenever possible to allow charging the batteries, since
this will prolong lead acid battery's life. Follow the battery charging schedule below, if AC power
is not the main power supply:
1.
Every 10 days when the table is in normal service; more often if usage demands.
2.
Charge whenever Battery Power indicates low or l ess than two green lights are displayed on
the base panel's Battery Power Indicator.
3.
Charge whenever any of the Battery Power icons indicate low or the base panel Battery
Level Indicator displays less than two green lights.
Note:
ITEMS
6-7
B2AV1000 Series Surgical Table
IM-B2AV1000-E01
MINIMUM FREQUENCY
1× per year
1× per year
Publicité
Table des Matières
