Install Head Section - Nuvo B2AV1000-1 Manuel

 The antistatic pathway is: Mattress Pad →Tabletop →Column →Base →Floor Lock
Pads →Floor. Therefore, the anti-static properties of the table depend upon the use of
the recommended mattress pads.
Le chemin antistatique est le suivant: Couvre-matelas→ dessus de Table→ Colonne→
Base→ Patins de verrouillage au sol→Plancher. Par conséquent, les propriétés
antistatiques de la table dépendent de l'utilisation des couvre-matelas recommandés par
NUVO.
1. Press the Lock button (#2, Figure 5-2) of Hand Pendant and wait for the green LED to light
up, the floor locks will become locked. The table will remain locked until the unlock button
(#8, Figure 5-2) is pressed.
2. Make sure the table does not wobble. If the table does not wobble it means the locks are
snug against the floor.

4.4 Install Head Section

1. Loosen thumbscrews under back section before
attaching or removing Head Section.
2. Insert connection rods of the head section into the
back section.
3. Tighten the two thumbscrews to secure the head
section.
CAUTION! MISE EN GARDE!
4-4
B2AV1000 Series Surgical Table
IM-B2AV1000-E01
Figure 4-3: