Table des Matières
Publicité
Keep any cleaning fluid out of electric receptacles.
Gardez tout liquide de nettoyage hors de contact des réceptacles électriques.
1.
Remove soil with a disposable cloth and place the used cloth in an appropriate
biohazards waste-disposal container.
2.
Clean tabletop according to the following steps:
a. Level the tabletop and at a comfortable working height.
b. Remove tabletop pads by peeling them away from tabletop. Place them on other clean
surfaces.
c. Hold the can of spray six to eight inches from surface and spray cleaning fluid liberally
on top and sides of pads. Clean only one pad at a time if possible.
d. Use a clean lint-free cloth to wipe sprayed surfaces, dampened with water to remove
cleaning fluid. To minimize streaking use dampening cloth.
e. To remove any remaining residue, wipe cleaned surfaces again with a clean, damp lint-
free cloth.
f. Repeat steps c, d and e for all sides of pad and for all tabletop surfaces.
g. Place and align pad on tabletop, and then press the pad so it is securely adhere to the
tabletop.
3.
Raise table to maximum elevation to clean lower surfaces.
4.
Clean the column and entire base surface:
a. Hold the can of spray six to eight inches from a surface and spray.
b. Use a clean lint-free cloth to wipe sprayed surfaces, dampened with water to remove
cleaning fluid. To minimize streaking use dampening cloth.
c. To remove any remaining residue, wipe cleaned surfaces again with a clean, damp lint-
free cloth.
CAUTION! MISE EN GARDE!
6-3
B2AV1000 Series Surgical Table
IM-B2AV1000-E01
Publicité
Table des Matières
