Table des Matières
Publicité
No.
1.
F1 Fuse (live)
2.
F2 Fuse (neutral)
3.
Wire Collect Tie
4.
Power Cord Socket
5.
Override System Cover
6.
Foot Control Socket
7.
AC Power Indicator (Green LED)
8.
Battery Power Indicator (10 bars-Full, 5
bars-Mid, 2 bars-Low)
9.
(not used)
10.
Footpump Pedal (B2AV1000SKP only)
11.
Override System Toggle Switches
12.
Override System Label (located inside of
"5. Override System Cover")
13.
Floor Lock
14.
Reverse Trendelenburg
5.2.2.1 B2AV1000S / B2AV1000SK / B2AV1000SKP
The B2AV1000S/B2AV1000SK/B2AV1000SKP tables are equipped with an Override System
(#12, Figure 5-4.1) for controlling table movements in the event of Hand Pendant malfunction.
The system consists of an on/off switch, table movement switches and a floor lock switch.
1. Flip down the override system cover.
2. Turn toggle switch (#20, Figure 5-4-1) to ON.
Note:
If the table moves by itself as you
enable the override system, disable it
right away and call for service.
Remarque: Si la table se déplace d'elle-même
alors que vous activez le système de
commande de priorité, désactivez-le
immédiatement et appelez un
technicien en entretien et en
réparation.
3. Toggle switch(s) (#11, Figure 5-4-1) up or
down to actuate desired table movement.
Description
No.
15.
Height Up
16.
Left Tilt
17.
Back Up
18.
Leg Up
19.
Tabletop Slide Up
20.
Override System Enable
21.
Disengage Floor Lock
22.
Trendelenburg
23.
Height Down
24.
Right Tilt
25.
Back Down
26.
Leg Down
27.
Tabletop Slide Down
28.
Override System Disable
5-16
B2AV1000 Series Surgical Table
IM-B2AV1000-E01
Description
Publicité
Table des Matières
