Quick Operating Keys; Pelco D/P Protocols - Abus TV7602 Notice D'installation

Quick Operating Keys

This dome provides following protocols: Pelco D and Pelco P.
These protocols are provided by several DVRs (e.g. TV8900-TV8903) and other controllers so
that the domes can be controlled with these devices.
Default setting of this dome is Pelco D / P (auto detection) with 2400 bps (bits per second).
This manual shows how to operate using controller TV7605. It is possible to operate cameras
with other controllers, but the keys could have other names.

PELCO D/P PROTOCOLS

The dome has a lot of shortcuts to support following functions:
Number 1~64 and 100~200 are for Preset-Positions, other keys are for function operations.
For example, to enter OSD MENU, press the button 95 + PRESET.
<Quick Operation Key Table 1>
Number
1~64,100~200 + Preset
65 + Preset
66 + Preset
67 + Preset
71~78 + Preset
81~88 + Preset
91 + Preset
92 + Preset
93 + Preset
94 + Preset
95 + Preset
96 + Preset
97 + Preset
<Quick Operation Keys Table 2> Use these function keys if controller has these keys>
Menu
Tilt Up / Down
Pan Left / Right
Focus Near
Focus Far
Zoom Tele
Zoom Wide
65 + preset:" Status Report" is displayed, to remove this screen, press Focus Near
button.
92 + preset: This feature freezes the current live image during tour, auto scan or pattern
operation. When you press 92 + preset button, the image freezes but the camera is still
working as per operation such as tour, pattern or auto scan. To return to normal images,
press 92 + preset button again. This feature is operated by preset number but not
included in OSD main menu.
If a controller asks for an unsupported feature "Not available" is displayed on the
monitor.
Note Function
Preset Executing Preset 1 ~ 64, 100~200
Preset Status Display Preset Status
Auto Scan Executing Auto Scan
Auto Flip Selectable On/Off Auto Flip mode
Group Tour Executing Group Tour #1 ~ #8
Pattern Executing Pattern #1 ~ #8
Zero Position Searching Pan / Tilt Zero Position
Freeze Select Freeze image when camera is working
BLC Selectable On/Off in BLC function
Day / Night Selectable Day / Night / Auto Mode
OSD Entering OSD Main Menu
Focus Adjust Focus adjust
Alarm Selectable Enable/Disable all Alarms
Function
Sub menu cursor moves up / down
Enter to the sub menu or status change or decrement
Using for Enter key when user select YES or NO
Using for function changing keys when set coordinate
Status cursor to the right
Status cursor to the left
48