Sector Set; Exit - Abus TV7602 Notice D'installation

J. SECTOR SET
Up to 8 programmable sectors are available with 16 characters each.
This feature is useful to entitle certain locations such as a parking zone.

SECTOR SET

SECTOR NO
SECTOR ID
SECTOR START : XXX.X.XX.X
SECTOR END
SAVE

EXIT

1. SECTOR SET – SECTOR NO.
Up to 8 programmable sectors are available to set.
2. SECTOR SET – SECTOR NAME
To set SECTOR NAME, move joystick right or left to change each digit.
Press ZOOM TELE button to moves to the next character from the left to the right and
ZOOM WIDE button to move to the prior character from the right to left.
Space is displayed when
3. SECTOR SET – SECTOR START
To set start position of sector, press FOCUS FAR button. Use the joystick to go to the
start position of sector. Press FOCUS FAR button again to escape.
4. SECTOR SET – SECTOR END
To set end position of sector, press FOCUS FAR button. Use the joystick to go to the
end position of sector. Press FOCUS FAR button again to escape.
5. SECTOR SET – SAVE
After setting the sector start- and end position, move joystick rightwards when the cursor
is on SAVE in order to save changes.
After saving, the cursor jumps to the following sector no. to set the next sector.
6. SECTOR SET – EXIT
Move joystick to the right to return to main menu.
K. EXIT
To escape OSD Main Menu, move joystick right or left when cursor is on exit. Camera is ready
to operate then.
: 01
: SECTOR01□□□□□□□□
: XXX.X.XX.X
appears.
64
Start-Position
End-Position