C. CAMERA SET
CAMERA SETUP
FLICKER
MIRROR
APERTURE
D ZOOM
WB MODE
PIC FLIP
BLC
D/N MODE
DSS MODE
EXIT
1.
CAMERA SET – FLICKERLESS
Flickerless feature is selected between 50Hz and 60Hz. The default setting is OFF. Set
flicker mode ON when power source frequency does not conform with to frequency of
the video system (NTSC: 60Hz / PAL: 50Hz). The default setting is OFF.
2.
CAMERA SET – MIRROR
This feature mirrors the picture image. Left and right side of picture are inverted when
setting is ON. The default setting is OFF.
3.
CAMERA SET – APERTURE
Aperture enhances picture detail by increasing gain of the camera and sharpening the
edges in the picture.
The default seeting is 10 (the aperture level is adjustable from 01 ~ 15).
4.
CAMERA SET – DIGITAL ZOOM
Move joystick rightwards in order to set ON, if you want to activate digital zoom. The
default setting is OFF.
5.
CAMERA SET – WB MODE
4 different white balance modes for varied conditions of vicinity illumination are
available. The default setting is AWB and it is possibly to change the mode option
according to the lighting conditions as below:
AWB Mode – 3,200°K to 6, 000°K (Default)
Indoor – up to 3,200°K
Outdoor – up to 5,800°K
ATW Mode - 2,000°K to 10, 000°K
: OFF
: OFF
: 10
: OFF
: AWB MODE
: OFF
: OFF
: AUTO
: OFF
56
DEFAULT SETTING