Abus TV7602 Notice D'installation page 55

Press FOCUS NEAR button when the cursor is at YES to clear memorized data. Each item
flickers for about 5~10 seconds such as tour, preset and so on. After this process, the menu
returns to the previous page.
* [PRESET CLEAR], [PATTERN CLEAR] has the effect of [TOUR CLEAR] too, because each
tour consists of a combination of presets and patterns.
LOAD FACTORY DEFAULT
ARE YOU SURE? YES NO
•
To clear all data and to return to factory default, move joystick rightwards when
cursor is at [LOAD FACTORY SETTINGS] to enter the above page.
•
Move joystick to the right or left direction in order to select YES,
press FOCUS NEAR button.
•
"NOW EEPROM CHECKING" and "ALL DATA INITIALIZING" is displayed about
5~7 seconds and the menu returns to the previous page automatically.
13. DOME SET – [NEXT PAGE] – SAVE AND EXIT
To save the stored data and escape this page, move joystick to the right direction when
cursor is at SAVE AND EXIT.
14. DOME SET – [NEXT PAGE] – EXIT
To escape this page without saving, move joystick to the right direction when cursor is at
EXIT.
NOW EEPROM
CHECKING
55
ALL DATA
INITIALIZING