Preset Set - Abus TV7602 Notice D'installation

D. PRESET SET
Presets are saved positions, which can be recalled by a shortcut. Alternatively it is possible to
store data out of menu. Type in any number (1~64 and 100~200) and hold PRESET button for
at least two seconds. The actual camera position will be saved under this number and a
confirmation is shown on screen.
To enter PRESET SETUP, move joystick rightwards when cursor is on PRESET SET.

PRESET SET

PRESET NO
PRESET ID
PAN: XXX.X
SAVE
EXIT
1. PRESET – PRESET NO.
Up to 165 numbers (1~64, 100~200) of preset positions are available. Move joystick to
the right or left direction to select preset no.
2. PRESET – PRESET NAME
To set preset name, select up to 16 characters moving joystick to the left or right.
Press ZOOM TELE button to move to the next character from the left to the right and
ZOOM WIDE button to move to the prior character from the right to left.
Space is displayed when " " appears.
3. PRESET – PAN: XXX.X TILT: XX.X
Press FOCUS FAR button in order to set preset position, then use the joystick to the
position which is needed memorized preset no. Then press FOCUS FAR button again
after setting a position of preset location.
4. PRESET – SAVE
Move the joystick to the right direction when the cursor is at SAVE to save the
memorized preset data and name. Then the cursor jumps to preset name for the next
preset no. to be set.
5. PRESET – EXIT
To escape this page, move joystick to the right direction.
:001
:PRESET001□□□□□□□□□
TILT: XX.X
58
DEFAULT SETTING