Abus TV7602 Notice D'installation page 53

9. DOME SET – [NEXT PAGE] – [PASSWORD]
To enter this page for setting a password, move the joystick to the right. The password can be a
number between 001 and 255. Confirm with
ENTER PASSWORD
BY ENTERING PRESET
CODE
PASSWORD
CONFIRM
Enter any number from 001~255 and press the preset button and use the same number at the
confirm field. Then "CONFIRMED" is displayed on the monitor and the menu will change to the
previous page automatically.
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM
<CONFIRMED>
If the user enters a different number between PASSWORD and CONFIRM, "CANCELLED" is
displayed on the monitor and the menu will return to the previous page automatically if user fails
3 times.
•
After setting a Password, the operator has to type in the memorized password in order to
enter OSD MAIN MENU, or to change any stored settings, e.g. Pattern, Tour etc.
•
The operator must remember the password for the operation since the manufacturer does
not provide a master password.
•
Do not forget to leave menu with SAVE AND EXIT on first page.
10. DOME SET – [NEXT PAGE] – [OSD DISPLAY]
Various in formations are displayed on the monitor after changing to ON in this menu. It
can be hidden when OFF is selected. Move joystick rightwards or leftwards in order to
select OFF/ON when the cursor is located on mentioned item.
OSD DISPLAY
CAMERA NAME : OFF
PRESET NAME : OFF
SECTOR NAME : OFF
COORDINATE
[PREVIOUS PAGE]
PRESET
***
***
***CONFIRMED
: ON
53
button. The default setting is 99.
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***CANCELLED
<CANCELLED>
DEFAULT SETTING