Alarm Management; Controller Operating Description; Using Keyboard Tv7605 - Abus Eyseo TV7098 Instructions D'installation

6.8 Alarm Management

The Eyseo Pan / Tilt dome camera is equipped with 1 alarm input. Once the alarm
event has been detected the buzzer from the receiver box will be triggered.
When the alarm event has been detected, the user has to press [EVENT RESET]
button on the Remote Control to deactivate the alarm and then the controller will
automatically switch
* This function is only available when using the Remote Control Module.

6.9 Controller Operating Description

Function
Search System Connection
Eyseo Pan / Tilt Dome Operation
Select Eyseo Pan / Tilt dome
Set Preset Position
Call Preset Position
Start Auto Pan Mode
Stop Auto Pan Mode
Deactivate Alarm

6.10 Using Keyboard TV7605

If you are using the Security-Center Keyboard TV7605 some keys are different.
Function
Save Preset Position
Call Preset Position
Start Auto Pan
to control the
Up Rotation
Down Rotation
Left Rotation
Right Rotation
Remote Control
[Set Preset]
[Go Preset]
[Auto Pan]
camera that
Remote Control
Press [0] + [Enter]
Press [Direction Button Up]
Press [Direction Button Down]
Press [Direction Button Left]
Press [Direction Button Right]
Press [1] - [9] + [Enter]
Press [1] - [16] + [Set Preset]
Press [1] - [16] + [Go Preset]
Press [1] - [6] + [AUTO PAN]
Press [AUTO PAN] or
any [DIRECTION] key
Press [EVENT RESET]
Keyboard
[PRST] (keep pressed for a
short period)
[PRST]
[SEARCH]
27
triggered the alarm.