Quick Guide Control Devices; Control Using Operator Panel Tv7605; Control Using Digi-Protect Software - Abus TV7602 Notice D'installation

Quick Guide Control Devices

Basically you can control the Mini Speed Motor Dome with all RS485 devices that can handle
Pelco P or Pelco D protocol.
Please refer to respective instruction manual for the connection method and further information.

Control using Operator Panel TV7605

See all information about the connection method and other information in instruction manual of
TV7606. This operator panel is designed specially for TV7600-TV7604 and supports all
functions.

Control using Digi-Protect Software

Enter the control menu by clicking on the DOME button in the software on the right side.
At the bottom a little box which shows the current protocol will appear.
Click on it to show further settings:
1. Protocol
Please select "Pelco D(Security-Center)" here
2. Device
Select the ID of the Camera you want to control (refer to page 65)
3. Com Port
Select the Com-Port your cable/converter is connected at
4. Speed
Select the Baud Rate you have set in the camera (refer to page 67)
5. Data Bits
Select "8" here
6. Parity
Select "None" here
The domes can be controlled after correct configuration.
Click on the MENU button to open OSD menu. An extra window with direction keys will appear.
You can navigate in the menu how described in this manual.
46