Operating And Configuring Via App - Abus TVAC19000A Notice D'utilisation

3. Then place the camera on the base plate and turn it so that the arrow is pointed at Lock.
The camera is now securely mounted. Connect the power supply unit with the camera.

6. Operating and configuring via app

The TVAC19000 Wi-Fi pan/tilt camera & app gives you the option of switching to live on the cameras and to
configure the recorder. The app for this device can be found in the App Store under the name of "App2Cam".
To configure access to the camera, proceed as follows:
 "App2Cam" app
Download the "App2Cam" app and install it on your
smartphone.
Make sure that your smartphone or tablet has internet access.
You have two options to connect the camera to the network:
Option 1:
Connect the LAN cable provided to the camera. Then connect
the cable to your router.
Connect the cable to your router in the next step.
Then connect the power supply unit provided.
Do not start to set up the camera until the LED lights up
constantly. This can take about 60 seconds.
Following this you can proceed with the setup at point .
38
English