Quick Operating Keys; Pelco D/P Protocols - Abus TVCC75100 Manuel Utilisateur

6. Quick Operating Keys

This dome provides three protocols: Pelco D, Pelco P and Maxpro.
These protocols are provided by several DVRs (e.g. TV3000-TV3031) and other controllers so that
the domes can be controlled with these devices.
Default setting of this dome is Pelco D / P (auto detection) with 2400 bps (bits per second).
In this manual relates to controller TV7605. It is possible to operate cameras with other controller,
but keys could have other names.

7.1 Pelco D/P Protocols

The dome has a lot of shortcuts to support following functions:
Number 1~64 and 100~200 are for Preset-Positions, other keys are for function operations.
For example, to enter OSD MENU, press the button 95 + PRESET.
Quick Operation Key Table 1
Number
1~64,100~200
+Preset
67 +Preset
69 + Preset
80~85 + Preset
86 + Preset
87~89 + Preset
90 + Preset
91 + Preset
92 + Preset
93 + Preset
94 + Preset
95 + Preset
96 + Preset
97 + Preset
98 + Preset
99 + Preset
Quick Operation Keys Table 2:
Use these function keys if controller has these keys
Menu
Tilt Up / Down
Pan Left / Right
Focus Near
Focus Far
Zoom Tele
Zoom Wide


Note
Preset
Auto Flip
DSS
Pattern
Auto Scan
Group Tour
OSD
Zero Position
Freeze
BLC
Day / Night
OSD
Focus Adjust
Vibration Correction
AUX 1
AUX 2
Function
Sub menu cursor moves up / down
Enter to the sub menu or status change or decrement
Using for Enter key when user select YES or NO
Using for function changing keys when set coordinate
Status cursor to the right
Status cursor to the left
Function
Executing Preset 1 ~ 64, 100~200
Selectable On/Off in Auto Flip mode
Selectable On/Off in Digital Slow Shutter
function
Executing Pattern #1 ~ #6
Executing Auto Scan
Executing Group Tour #1 ~ #3
Entering OSD Main Menu
Searching Pan / Tilt Zero Position
Select Freeze image when camera is working
Selectable On/Off in BLC function
Selectable Day / Night / Auto Mode
Entering OSD Main Menu
Focus adjust
Selectable On/Off in Vibration Correction
function
Selectable On/Off in Aux1
Selectable On/Off in Aux2
61






