ATTENTION
The equipment is intended for use only in
premises having a service current capacity
100A per phase, supplied from a distribution
network having a nominal voltage of
230V, and instruct the user to determine in
consultation with the supply authority, if
necessary, that the service current capacity
at the interface point is sufficient for the
equipment. The equipment shall be clearly
marked as being suitable for use only in
premises having a service current capacity
equal to or greater than 100 A per phase.
(4.1)
GETTING STARTED
UNPACKING
Caution: This packaging contains sharp
objects. Take care when unpacking.
Remove the machine, together with the
accessories supplied from the packaging.
Check carefully to ensure that the machine
is in good condition and account for all the
accessories listed in this manual. Also make
sure that all the accessories are complete.
If any parts are found to be missing,
the machine and its accessories should be
returned together in their original packaging
to the retailer. Do not throw the packaging
away; keep it safe throughout the guarantee
period. Dispose of the packaging in an
environmentally responsible manner.
Recycle if possible. Do not let children
play with empty plastic bags due to the
risk of suffocation.
www.evolutionpowertools.com
SERIAL NO. / BATCH CODE
The manufacturing date code is the first part of
the serial number, found on the motor housing
of the machine. Evolution serial numbers
begin with the abbreviation of the machine
followed by a letter. A = January, B = February
and so on. The following 2 numbers are the
year of manufacture. 09 = 2009, 10 = 2010, etc.
(Example of batch code: XXX-A10)
For instructions on how to identify the batch
code, please contact the Evolution Power
Tools helpline or go to:
www.evolutionpowertools.com
12