Clamping Lever Adjustment; Technical Data; Electrical Installation Information - KaWe MASTERLIGHT LED 1000 Mode D'emploi

Clamping lever adjustment

MASTERLIGHT LED 1000 & MASTERLIGHT LED 2000
If the lamp shade moves too tightly or does not maintain the
s must be
Clamping lever adjustment
set position, it is necessary to adjust the braking effect of the
nation.
MASTERLIGHT LED 1000 & MASTERLIGHT LED 2000
clamping arm between the light arm and the stand post.
If the lamp shade moves too tightly or does not maintain the
set position, it is necessary to adjust the braking effect of the
ir
clamping arm between the light arm and the stand post.
ressure
om 700
Pa to
060 hPa

9. Technical data

Note: The technical data are subject to certain deviations. For operational reasons, the actual values may differ slightly from the
9. Technical data
values specified below. The values for Ra can deviate by approx. ± 5%. The color temperature values can deviate by APPROX. ± 200 K.
Note: The technical data are subject to certain deviations. For operational reasons, the actual values may differ slightly from the
values specified below. The values for Ra can deviate by approx. ± 5%. The color temperature values can deviate by
by the
must be
Photometric data
Brightness / 0.5 meter [lux]
Brightness / 1 meter [lux]
t must be
Color rendering index Ra
nical and
Color rendering index R9
Color temperature [K]
Heat build-up (head) [°C]
ure is
Light spot size Ø [cm]
A3) in
Dimming range [%]
Number of LEDs
Working lifespan of the LEDs [h]
erations,
Work area [cm]
ug it!
Lamp shade Ø [cm]
Height adjustment [cm]
Electrical data
Power input [W]
Operating voltage [V/DC]
Input voltage [V/AC]
Input frequency [Hz]
Amperage [A]
Protection class
Lamp shade protection class
(acc. to IEC60529)
Weight
Weight of lamp shade + stand [kg]
The rest of the technical data can be requested from the manufacturer (see the address on the back cover page).
The rest of the technical data can be requested from the manufacturer (see the address on the back cover page).

Electrical installation information

Electrical installation information
When switched on, KaWe examination lights are exposed to a peak current. Their standard scope of delivery includes a power
adapter with a plug.
When switched on, KaWe examination lights are exposed to a peak current. Their standard scope of delivery includes a power
adapter with a plug.
The MASTERLIGHT LED 2000/ 3000/ 3000F/ 4000/ 4000F examination lights are devices with Protection Class I. To
avoid the risk of electric shock, these devices may only be connected to a power adapter with a grounding wire!
The MASTERLIGHT LED 2000/ 3000/ 3000F/ 4000/ 4000F examination lights are devices with Protection Class I.
To avoid the risk of electric shock, these devices may only be connected to a power adapter with a grounding wire!
34
MASTERLIGHT LED 1000
MASTERLIGHT LED 1000
LED 1000 LED 2000
30 000 60 000
7 800 14 000
97 97
96 95
4000 4000
0.5 0.5
10 11
50-100
3 7
60 000 60 000
35-80 40-100
12 22
60 60
7 10
12 24
100-240 90-264
50-60 50-60
0.6 0.42
II I
IP 42 IP 42
5 6
MASTERLIGHT LED 2000
MASTERLIGHT LED 2000
MASTERLIGHT model
LED 3000 LED 3000F LED 4000
- -
40 000 50 000
96 96
94 94
4500 4500
0.5 0.5
15 13-18
50-100 50-100
12 12
60 000 60 000
70-140 70-140
29 29
121 121
9 9
24 24
100-240 100-240
50-60 50-60
0.4 0.4
I I
IP 42 IP 42
12 12
± 500 K.
.
APPROX
LED 4000F
- -
60 000 70 000
96 96
94 94
4500 4500
0.5 0.5
14 13-19
50-100 50-100
19 19
60 000 60 000
70-140 70-140
33 33
123 123
16 16
24 24
100-240 100-240
50-60 50-60
0.7 0.7
I I
IP 42 IP 42
12.5 12.5