Maintenance: On/Off Switch; Maintenance: Brightness Control; Maintenance: Positioning; Masterlight Led 3000 / 3000F - KaWe MASTERLIGHT LED 1000 Mode D'emploi

Masquer les pouces Voir aussi pour MASTERLIGHT LED 1000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 41
С) Maintenance: ON/OFF switch
D) Maintenance: Brightness control
Brightness is controlled on the control panel (B) in the
range from 50% to 100%:
a Press the „Intensity +„ button: Brightness will increase
a Press the „Intensity -„ button: Brightness will decrease
E) Maintenance: Positioning
Press the clamping lever (K) on the transformer housing.
Use the handle (H) to adjust the lamp shade position. The
fl exible swivel (G) holds the lamp shade in position.
To turn the examination light
on and off , press the (A) switch
on the power supply housing.
The examination light must not be installed at an
angle < 90°.
Risk of rupture of fl exible hose connection!

MASTERLIGHT LED 3000 / 3000F

A) Scope of delivery
1x stand base (fi ve-footed base with foot, rollers and
hardware)
1x stand post
1x lamp shade incl. short arm
1x User's Manual
B) Installation
See Installation of MASTERLIGHT LED 3000/ 3000F &
MASTERLIGHT LED 4000/ 4000F on page 10.
During the installation of the examination light, the
entire system must be disconnected from the mains!
С) Maintenance: ON/OFF switch
To turn the examination light
on and off , press the (A)
button on the control panel.
To switch off , press and hold
button (A) for at least 1 sec.
If the light is in standby mode,
the top LED on the control
panel fl ashes.
31

Publicité

Table des Matières
loading

Table des Matières