Publicité
Les langues disponibles
Les langues disponibles
•
Blow through mesh screen with compressed air.
•
Reinstall the mesh screen and the inlet fitting. Make sure the
connection is in place and tight.
Cleaning of gas ballast valve
(accessory)
Check regularly if the gas ballast valve works. If no air or nitrogen en-
ters correctly the gas ballast valve, remove it and blow it out with com-
pressed air.
Maintenance
Seite / Page 24
Replace tip seals
Spare parts
Consumables kit for Fossa FO 0015 A, Busch Art. N°: 0990 559 196
Tools
The following tools are necessary for the assembly/ disassembly of
FOSSA vacuum pumps :
Tools
Allen key
Allen key
Cutter
Spanner
No special tools are needed for the assembly/ disassembly and mainte-
nance operations of the pump.
Disassembly
The Fossa vacuum pump can easily be disassembled and re-assembled.
The following points must be adhered to in order to prevent any da-
mage to the parts and to ensure correct operation of the pump after
reassembling.
•
Unscrew the 3 screws of the protection cover and take it off.
6 mm, ideally T-shape
4 mm
-
21 mm
FO 0015 A
Publicité
