BUSCH FOSSA Notice D'instructions page 32

UK Declaration of Conformity
This Declaration of Conformity and the UKCA-mark affixed to the nameplate are valid for the machine within the
Busch scope of delivery. This Declaration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery
(this can be the operating company, too) must conduct the conformity assessment process for the superordinate
machine or plant, issue the Declaration of Conformity for it and affix the UKCA-mark.
The manufacturer
declares that the machine(s): FOSSA FO 0015 A
fulfil(s) all the relevant provisions from UK legislations:
– Supply of Machinery (Safety) Regulations 2008
– Electromagnetic Compatibility Regulations 2016
– Restriction of the use of certain hazardous substances in electrical and electronic equipment Regulations 2012
and comply(-ies) with the following designated standards that have been used to fulfil those provisions:
Standard
BS EN ISO 12100 : 2010
BS EN ISO 13857 : 2019
BS EN 1012-1 : 2010
BS EN 1012-2 : 1996 + A1 : 2009
BS EN ISO 2151 : 2008
BS EN 60204-1 : 2018
BS EN IEC 61000-6-2 : 2019
BS EN IEC 61000-6-4 : 2019
BS EN 13849-1 : 2015
(1) In case control systems are integrated.
Legal person authorized to compile the technical file
and importer in the UK
(if the manufacturer is not located in the UK):
Chevenez, 14.05.2021
Christian Hoffmann, General Director
32
Ateliers Busch S.A.
Zone Industrielle
CH-2906 Chevenez
Title of the Standard
Safety of machinery. Basic concepts, general principles of design. Risk assess-
ment and risk reduction.
Safety of machinery - Safety distances to prevent hazard zones being reached
by the upper and lower limbs.
Compressors and vacuum pumps. Safety requirements. Air compressors and
vacuum pumps.
Acoustics - Noise test code for compressors and vacuum pumps - Engineering
method (grade 2)
Safety of machinery. Electrical equipment of machines. General requirements.
Electromagnetic compatibility (EMC) - Generic standards. Immunity standard
for industrial environments.
Electromagnetic compatibility (EMC) - Generic standards. Emission standard
for industrial environments.
(1) Safety of machinery. Safety-related parts of control systems. General principles
for design.
Busch (UK) Ltd
30 Hortonwood
Telford - UK