Publicité
Les langues disponibles
Les langues disponibles
EU Declaration of Conformity
This Declaration of Conformity and the CE-mark affixed to the nameplate are valid for the machine within the
Busch scope of delivery. This Declaration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery
(this can be the operating company, too) must conduct the conformity assessment process for the superordinate
machine or plant, issue the Declaration of Conformity for it and affix the CE-mark.
The manufacturer
declares that the machine(s): FOSSA FO 0015 A
fulfil(s) all the relevant provisions from European directives:
– 'Machinery' 2006/42/EC
– 'Electromagnetic Compatibility' 2014/30/EU
– 'RoHS' 2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic equip-
ment (incl. all related applicable amendments)
and comply(-ies) with the following designated standards that have been used to fulfil those provisions:
Standard
EN ISO 12100 : 2010
EN ISO 13857 : 2019
EN 1012-1 : 2010
EN 1012-2 : 1996 + A1 : 2009
EN ISO 2151 : 2008
EN 60204-1 : 2018
EN IEC 61000-6-2 : 2019
EN IEC 61000-6-4 : 2019
EN ISO 13849-1 : 2015
(1)
In case control systems are integrated.
Legal person authorized to compile the technical file
and authorized representative in the EU
(if the manufacturer is not located in the EU):
Chevenez, 14.05.2021
Christian Hoffmann, General Director
Ateliers Busch S.A.
Zone Industrielle
CH-2906 Chevenez
Title of the Standard
Safety of machinery - Basic concepts, general principles of design
Safety of machinery - Safety distances to prevent hazard zones being reached
by the upper and lower limbs
Compressors and vacuum pumps - Safety requirements - Part 1 and Part 2
Acoustics - Noise test code for compressors and vacuum pumps - Engineering
method (grade 2)
Safety of machinery - Electrical equipment of machines - Part 1: General re-
quirements
Electromagnetic compatibility (EMC) - Generic standards. Immunity for indus-
trial environments
Electromagnetic compatibility (EMC) - Generic standards. Emission standard
for industrial environments
(1)
Safety of machinery - Safety-related parts of control systems - Part 1: General
principles for design
Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg
31
Publicité
